Forgotten Password?

No Items in basket

You are in > Line Builder

Line Builder

Please fill in the below form to receive a quotation from Venhill on your choices.

How to measure your Brake or Clutch line

If the old line is on the bike, use a flexible tape to following the route of the line. Measure your original line from centre of the banjo at one end to the centre of banjo at the other end. This gives the overall length of the line including fittings. To get the hose length deduct 40mm from the overall length. Select this hose length from the drop down list and your requred fittings.

Example: If overall line length measures at 540mm, then the hose required is 500mm.

Note: When fitting new hoses ensure that there is 'free play' they must not be strained or under tension. Remember to consider full steering and suspension travel.


 
Hose selection  
Hose colour
End finish
Off road rigid protection sleeve only
   
Your details
First Name (*):
Last Name (*):
Company Name
Email Address (*):
Telephone Number (*):
Items marked with an asterix are mandatory.