Welcome to Venhill Engineering Ltd.
Other Cable Components
Venhill offer a range of components and fittings. We also have other cable components and fittings to include in your cable toolbox. From cable conduit, sleeving and ball joints, to washers and wire cutters, our website includes everything you need to get started.
-
10973CABLE - HOSE GUIDE
Suitable for fitting onto most cables and hoses. Length of grommett is 20mm. I.D. is 6mm but will...
Excl. Tax: £0.57 Incl. Tax: £0.68 -
WC6WIRE & ROPE CUTTER
High carbon steel parrot nosed cutters are perfect for cutting cable wire, conduit and brake hose,...
Excl. Tax: £16.47 Incl. Tax: £19.76 -
VEN-320ROSE JOINT - M6 THREAD-6mm HOLE
TEFLON BEARING RACE. Distance from bottom of m6 internal thread to centre line of crosshole is...
Excl. Tax: £6.19 Incl. Tax: £7.43 -
VEN-310QRBALL JOINT - M6 THREAD-M6 STUD
QUICK RELEASE. Distance from bottom of m6 internal thread to centre line of m6 stud is approx 8mm.
Excl. Tax: £5.45 Incl. Tax: £6.54 -
VEN-310BALL JOINT - M6 THREAD-M6 STUD
Distance from bottom of m6 internal thread to centre line of m6 stud is approx 10mm.
Excl. Tax: £5.35 Incl. Tax: £6.42 -
-
-
T.0462/PIN LINE STOP SWITCH LESS CAP & COVER
Inline switch which connects the two outer pins inside the housing when the brake is applied. This...
Excl. Tax: £23.75 Incl. Tax: £28.50 -
M1012/2673RUBBER COVER/CAP FOR MICRO SWITCH
SUITABLE FOR IN LINE BRAKE SWITCH T.0462/P Material 60 ShA RUBBER
Excl. Tax: £2.82 Incl. Tax: £3.38 -
7B90FLEXIBLE BEND LB3 CONDUIT (7mm)
Clip on ferrule bend for LB3 conduit. Easy clip on solution to create a rigid bend in cable conduit...
Excl. Tax: £2.24 Incl. Tax: £2.69 -
SE264/LAVSPADE END FOR 2.5mm LAVERDA SPEEDO CABLE
USED FOR LAVERDA SPEEDO CABLES ONLY & FITS ONTO A 2.50mm SQUARE END WITH A DEPTH OF 22.00mm 36mm...
Excl. Tax: £15.00 Incl. Tax: £18.00 -
FB206/1KAWASAKI FERRULE BEND BRACKET
FOR BEND USE FB206 ZINC & CLEAR FINISH.
Excl. Tax: £2.55 Incl. Tax: £3.06
