Welcome to Venhill Engineering Ltd.
This kit is ‘universal’ and is supplied with cables that are unfinished at one end so that they can be cut to length and all of the connections are designed to fasten securely without the need for soldering.
This throttle and idle cable kit comes with threaded end fittings for the throttle twistgrip housing, designed to suit a wide range of models. The clear PVC coating protects the braided stainless steel conduit which is extra-long, 1350mm (53 inches) of 7.00mm O.D and so allows for fittings to bikes with high handlebars.
The end fittings provided include an attached stepped ferrule with a body O.D of 8.00mm and a nose O.D of 5.50mm and a collection of loose threaded ferrule bends which have a threaded nose of either 1/4 inch x 20 UNC or 5/16 inch x 18 UNC and the range of angles to give you a choice of either 90° or 75° bends.
The wire (1.20mm rope) has a fixed ball nipple on one end of 4.30mm O.D. and has a loose adjustable barrel nipple of 6.00mm O.D by 10.00mm to locate as necessary by securing with the 1.5mm hex grub screw.
This kit is also provided with a small tube of adhesive for bonding the conduit end fittings to the PVC coating.