Welcome to Venhill Engineering Ltd.

Workshop Kits

Venhill offer a range of workshop kits for all your control cable needs. Our comprehensive range includes throttle cable kits and clutch cable kits, as well as specific component kits (such as adjuster and ferrule kits, rubber boot kits, roadside repair kits, and nipple kits).

Grid List

Set Descending Direction

9 Item(s)

  1. NIPPLE KIT

    NIPPLE KIT

    NIPPLE
    Excl. Tax: £85.63 Incl. Tax: £102.76

    Kit contains the a wide range on Barrel, Trumpet (Pear), Ball and Carburetor nipples. The majority of which are suitable for soldering to an appropriately sized wire, however there are also a couple of solderless barrel nipples as well.

    Please see the PDF for a full inventory of this kit.

  2. RUBBER BOOT KIT
    Excl. Tax: £81.56 Incl. Tax: £97.87


    Please see the PDF for a full inventory of this kit.

  3. ROADSIDE CABLE REPAIR KIT
    Excl. Tax: £9.13 Incl. Tax: £10.96
    ROADSIDE CABLE REPAIR KIT, CONTAINS A SELECTION OF WIRE & WIRE FITTINGS FOR QUICKLY AND EASILY REPLACING A SNAPPED OR BROKEN INNER WIRE
  4. ADJUSTER & FERRULE KIT
    Excl. Tax: £85.63 Incl. Tax: £102.76

    This kit contains cable end ferrules as well as popular end adjusters. Components are manufactured from either brass or mild steel (zinc plated) and can be individually topped up at any time.

    Please see the PDF for a full inventory of this kit.

  5. Workshop Clutch Cable Kit
    Excl. Tax: £33.83 Incl. Tax: £40.60
    Typical application: motorcycle clutch cables. Supplied with 5 meters of Teflon lined outer conduit and 5 meters of 2mm o.d inner wire. A range of nipples and high quality fittings are included. The ferrules and bends are a snug fit on the conduit. They can be bonded in place during the assembly or retained with a small centre punch, making an indentation to their side. The fittings can be adapted for a range of models. There are enough fittings in the kit to make at least five lines. Additional fittings, conduit and wire can be purchased separately as required. You will need a soldering kit to solder the nipples in place. Go to downloads for instructions on making up your cables and soldering the nipples.
  6. WORKSHOP THROTTLE CABLE REPAIR KIT
    Excl. Tax: £25.86 Incl. Tax: £31.03

    Typical application: motorcycle clutch cables. Supplied with 5 meters of Teflon lined outer conduit and 5 meters of 2mm o.d inner wire. A range of nipples and high quality fittings are included. The ferrules and bends are a snug fit on the conduit. They can be bonded in place during the assembly or retained with a small centre punch, making an indentation to their side. The fittings can be adapted for a range of models. There are enough fittings in the kit to make at least five lines. Additional fittings, conduit and wire can be purchased separately as required. You will need a soldering kit to solder the nipples in place. Go to downloads for instructions on making up your cables and soldering the nipples. Check our Resources section for instructions on making up your cables and soldering the nipples.

  7. WORKSHOP CLUTCH/THROTTLE CABLE KIT
    Excl. Tax: £138.32 Incl. Tax: £165.98

    Full component list can be downloaded here.



    Box dimensions  H 220mm  W 240mm  L 460mm

    We recommend our VT13 Bird Caging tool to make the bonds with your nipple much stronger.

    Please note: The low friction PTFE Liner is now included inside the conduit to make it easier to make the cables!

  8. WORKSHOP BRAIDED CLUTCH CABLE KIT
    Excl. Tax: £201.40 Incl. Tax: £241.68
    WORKSHOP BRAIDED CLUTCH CABLE KIT
  9. WORKSHOP BRAIDED THROTTLE CABLE KIT
    Excl. Tax: £229.51 Incl. Tax: £275.41
    WORKSHOP BRAIDED THROTTLE CABLE KIT

Grid List

Set Descending Direction

9 Item(s)