Welcome to Venhill Engineering Ltd.

Black Outer Cable

Venhill offer a range of workshop kits to make black outer throttle and clutch cables. These kits include the cables and all the fittings and components needed to get started. The fittings can be adapted for a range of models. The outer cables (conduit) are pre-lined with PTFE (commonly referred to as Teflon) for super smooth operation.

Grid List

Set Descending Direction

4 Item(s)

  1. WORKSHOP CLUTCH CABLE KIT
    Excl. Tax: £35.52 Incl. Tax: £42.62
    Typical application: motorcycle clutch cables. Supplied with 5 meters of Teflon lined outer conduit and 5 meters of 2mm o.d inner wire. A range of nipples and high quality fittings are included. The ferrules and bends are a snug fit on the conduit. They can be bonded in place during the assembly or retained with a small centre punch, making an indentation to their side. The fittings can be adapted for a range of models. There are enough fittings in the kit to make at least five lines. Additional fittings, conduit and wire can be purchased separately as required. You will need a soldering kit to solder the nipples in place. Go to downloads for instructions on making up your cables and soldering the nipples.
  2. WORKSHOP CLUTCH & THROTTLE CABLE KIT
    Excl. Tax: £49.12 Incl. Tax: £58.94

    This kit is a combination of VWK002 & VWK003

  3. WORKSHOP THROTTLE CABLE KIT
    Excl. Tax: £27.16 Incl. Tax: £32.59

    Typical application: motorcycle clutch cables. Supplied with 5 meters of Teflon lined outer conduit and 5 meters of 2mm o.d inner wire. A range of nipples and high quality fittings are included. The ferrules and bends are a snug fit on the conduit. They can be bonded in place during the assembly or retained with a small centre punch, making an indentation to their side. The fittings can be adapted for a range of models. There are enough fittings in the kit to make at least five lines. Additional fittings, conduit and wire can be purchased separately as required. You will need a soldering kit to solder the nipples in place. Go to downloads for instructions on making up your cables and soldering the nipples. Check our Resources section for instructions on making up your cables and soldering the nipples.

  4. WORKSHOP CLUTCH/THROTTLE CABLE KIT
    Excl. Tax: £145.24 Incl. Tax: £174.29

    Full component list can be downloaded here.



    Box dimensions  H 220mm  W 240mm  L 460mm

    We recommend our VT13 Bird Caging tool to make the bonds with your nipple much stronger.

    Please note: The low friction PTFE Liner is now included inside the conduit to make it easier to make the cables!

Grid List

Set Descending Direction

4 Item(s)