Custom Cables

How much will it cost?

Guide prices for custom made bespoke cables are shown below:

Cable Type Motorbike StandardConduit Ex VAT Motorbike BraidedConduit Ex VAT Other VehicleStandard Conduit Ex VAT
Standard Clutch/Brake *
Large Clutch/Brake †
(Heavy Duty Harley Davidson etc)
Single Choke/Throttle
(or Powervalve Single)
Push/Pull Throttle
(or Twin Pull/Powervalve x2)
Cables with J/Box
(2 to 1)
Cables with J/Box
(3 to 1)
Speedo/Tacho Cable (Black)
Speedo/Tacho Cable (Grey)
Twist grip Conversion (Customer supplied twist grip)
Twist grip Conversion (Venhill supplied twist grip)
Twist grip price + cable(s)
Additional Labour
£46.00 / hour
  • Minimum charge (repairs to existing cable) - £20.00 plus VAT
  • Clutch or Brake cables that include a switch are charged with the additional cost of the switch - £27.00 plus VAT
  • Replacement inner wire for any cable is price listed above - less 50%
  • * Using standard conduit 7mm o.d
  • † Using heavy duty conduit 9mm o.d
What's the turnaround time?
  • Spring - 5-7 working days*
  • Summer - 14-21 working days*
  • Autumn - 10-14 working days*
  • Winter - 3-5 working days*

* Please bear in mind production takes priority over bespoke cable jobs. Custom jobs are fitted around production for orders.

How do I get them made?
  • Please complete & print this contact form with all your contact details
  • Print and annotate this form to specify dimensions and fittings required if you are not sending samples.
  • Post your cables/drawing, along with the contact form above to our address: Venhill Engineering Limited, 21 Ranmore Rd, Dorking, Surrey, RH4 1HE, United Kingdom

Please use a method of recorded or tracked mail if your cables are of high value to you. Venhill Engineering will not be held responsible for cables that are lost in the post!

Please note:

  • Postage cost for sending the completed cables back to you will be added to this price. This varies depending on the size of the cable(s) and how many we are returning to you.
  • Remember these are GUIDE PRICES and they can be slightly higher if extra work is required. We will always contact you to check before starting the work if there is an additional charge.
  • Do not send cheques with your cables written to the prices listed here! We will contact you to let you know the total to pay including the postage for returning completed items.
  • Exup / Powervalve cables will use solderless nipples at the exhaust end of the cable.
  • We do not re-plate or refurbish fittings. We are not in the parts restoration business. If we have to use your original fittings for parts, you can request that we send the fittings back to you so you can have them plated or cleaned before we make the cables.

If you have any additional questions please see our FAQ page or Contact us