Hydex Honda Race Motorcycle on track

Why twin-disc racers need a different brake line layout. 

Browse Venhill’s range of braided brake line kits and you’ll notice some carry ‘Race’ in the description. It’s not a marketing flourish – it refers to a specific hose layout, and if you’re racing a bike with twin front discs under ACU regulations, it’s one you need to know about.

The standard set-up

On most road bikes with twin front discs, braking force gets from the master cylinder to the callipers via a split in the line. A single hose runs from the master cylinder down towards the front mudguard, where a joint – often a T-piece or connector – divides it into two short hoses, one for each calliper.

It’s a neat, economical arrangement for the road, but it places a joint in the brake line directly over the front wheel.


Venhill Motorcycle Race Engine Brake Line & HoseVenhill Motorcycle Race Engine Brake Line & Hose

What the ACU requires

For competition, the Auto-Cycle Union (ACU) – the governing body for motorcycle sport in Britain – doesn’t allow brake hoses to be joined over the wheel.

Its regulations state that on “…machines fitted with two front disc brakes, a split of the front brake lines for both front brake callipers must be made at or above the lower fork.” In other words, any division of the front brake line has to happen up at the fork, not down over the wheel.

You can find the full ACU regulations in the ACU Handbook, but you’ll need a membership to view it.


Motorcycle Front Brake Line Layouts DiagramMotorcycle Front Brake Line Layouts Diagram

The ‘Race’ layout

Venhill kits with ‘Race’ in the description solve this at the top of the system. Instead of one hose splitting into two, a double banjo at the master cylinder feeds two separate lines, and each line runs directly to its own calliper.

There is no joint over the wheel – in fact there’s no split in the system at all, just an unbroken hose from the master cylinder to each calliper. That satisfies the ACU requirement and means fewer connections in the system.

Which do you need?

If your bike has a single front disc, the question doesn’t arise. For twin-disc machines being prepared for racing under ACU regulations, choose a kit with ‘Race’ in the description – it will pass scrutineering where a standard over-the-wheel split won’t. 

Browse the full range of braided brake line kits, or get in touch and we’ll help you spec the right kit for your bike.

Race Motorcycle on track with Venhill brake lines on showRace Motorcycle on track with Venhill brake lines on show