FREE SHIPPING ON ORDERS OVER £300, UK ONLY

Adjusters

Venhill offer a full range of cable adjusters. These cable adjusters help offer precision set up for levers and throttles and general cable adjustment. Our cable adjusters come in different sizes to suit your specific set up and requirements.

View as Grid List

Items 25-36 of 40

Set Descending Direction
  1. STEEL ADJ SCREW M8 x 1.0 X 42mm
    STEEL ADJ SCREW M8 x 1.0 X 42mm
    A8100/42
    I.D. for cable ferrule 6.42mm
    £2.39 £1.99
  2. ALLOY ADJ SCREW M8 x 1.0 X 27mm
    ALLOY ADJ SCREW M8 x 1.0 X 27mm
    A8100/27
    I.D. for cable ferrule 6.42mm
    £2.22 £1.85
  3. ALLOY ADJ SCREW M8 x 1.0 X 17mm
    ALLOY ADJ SCREW M8 x 1.0 X 17mm
    A8100/17
    I.D. for cable ferrule 7.14mm, 3.34mm I.D. for wire
    £2.66 £2.22
  4. MIDWAY ADJUSTER, THREAD 20mm LONG
    MIDWAY ADJUSTER, THREAD 20mm LONG
    A675B
    To be used with ferrule up to 6.5mm od on each end.
    £2.44 £2.03
  5. MIDWAY ADJUSTER. THREAD 25mm LONG
    MIDWAY ADJUSTER. THREAD 25mm LONG
    A61B
    Ideally for LB2TS conduit, use F89 stepped ferrule on the adjuster stem end, and F89B standard...
    £3.43 £2.86
  6. STEEL ADJUSTER SCREW M6 x 1.0 X 32mm
    STEEL ADJUSTER SCREW M6 x 1.0 X 32mm
    A6100/32/1
    M6 x 1.0 X 32mm THREAD. SUITABLE FOR A 6mm DIA. FERRULE.
    £1.51 £1.26
  7. STEEL ADJUSTER SCREW M6 x 1.0 X 25mm
    STEEL ADJUSTER SCREW M6 x 1.0 X 25mm
    A6100/25
    M6 x 1.0 X 25mm THREAD. SUITABLE FOR A 6mm DIA. FERRULE.
    £1.51 £1.26
  8. STEEL ADJUSTER SCREW M6 x 1.0 X 20mm
    STEEL ADJUSTER SCREW M6 x 1.0 X 20mm
    A6100/20
    M6 x 1.0 X 20mm THREAD. SUITABLE FOR A 6mm DIA. FERRULE.
    £1.51 £1.26
  9. STEEL ADJ SCREW M6 x 0.75 X 20mm
    STEEL ADJ SCREW M6 x 0.75 X 20mm
    A6075/20
    Mikuni Carb adjuster
    £1.18 £0.98
  10. STEEL ADJ SCREW M6 x 0.75 X 15mm
    STEEL ADJ SCREW M6 x 0.75 X 15mm
    A6075/15
    M6 x 0.75mm 15mm long threaded section. Use lock nut LN6075. Suitable for AMAL carburettors on...
    £1.75 £1.46
  11. ADJ SCREW 5/16 UNF X 1 3/8
    ADJ SCREW 5/16 UNF X 1 3/8" (24 TPI)
    A31/137U
    Suitable for wire up to 3mm O.D. | Use F101 ferrule for LB3TS | FT4SN ferrule for T4NS...
    £2.48 £2.07
  12. STEEL ADJUSTER SCREW 5/16 BSC x 1 3/8
    STEEL ADJUSTER SCREW 5/16 BSC x 1 3/8"
    A31/137C
    35mm adjuster thread length, 5/16 BSC thread
    £3.07 £2.56
per page