WORKSHOP CLUTCH & THROTTLE CABLE KIT
SKU:
VWK026
£88.72
£73.93
Backorder Available
Lead time
2 Days
This is a combination of VWK002, Workshop Throttle Cable Kit & VWK003, Workshop Clutch Cable Kit.
Clutch Cable Kit: Supplied with 5 meters of Teflon lined outer conduit and 5 meters of 2mm o.d inner wire. A range of nipples and high quality fittings are included. The ferrules and bends are a snug fit on the conduit. They can be bonded in place during the assembly or retained with a small centre punch, making an indentation to their side. The fittings can be adapted for a range of models. There are enough fittings in the kit to make at least five lines. Additional fittings, conduit and wire can be purchased separately as required. You will need a soldering kit to solder the nipples in place. Go to downloads for instructions on making up your cables and soldering the nipples.
Throttle Cable Kit. Supplied with 5 meters of Teflon lined outer conduit and 5 meters of 1.5mm O.D. inner wire. A range of nipples and high quality fittings are included. The ferrules and bends are a snug fit on the conduit. They can be bonded in place during the assembly or retained with a small centre punch, making an indentation to their side. The fittings can be adapted for a range of models. There are enough fittings in the kit to make at least five lines. Additional fittings, conduit and wire can be purchased separately as required. You will need a soldering kit to solder the nipples in place. Go to downloads for instructions on making up your cables and soldering the nipples.
Clutch Cable Kit: Supplied with 5 meters of Teflon lined outer conduit and 5 meters of 2mm o.d inner wire. A range of nipples and high quality fittings are included. The ferrules and bends are a snug fit on the conduit. They can be bonded in place during the assembly or retained with a small centre punch, making an indentation to their side. The fittings can be adapted for a range of models. There are enough fittings in the kit to make at least five lines. Additional fittings, conduit and wire can be purchased separately as required. You will need a soldering kit to solder the nipples in place. Go to downloads for instructions on making up your cables and soldering the nipples.
Throttle Cable Kit. Supplied with 5 meters of Teflon lined outer conduit and 5 meters of 1.5mm O.D. inner wire. A range of nipples and high quality fittings are included. The ferrules and bends are a snug fit on the conduit. They can be bonded in place during the assembly or retained with a small centre punch, making an indentation to their side. The fittings can be adapted for a range of models. There are enough fittings in the kit to make at least five lines. Additional fittings, conduit and wire can be purchased separately as required. You will need a soldering kit to solder the nipples in place. Go to downloads for instructions on making up your cables and soldering the nipples.